Connect your receiver pins to the MultiWii Flight Controller

Connecting the receiver to the MultiWii is very easy once you know your channels.

To do this you can use the connectors that already come with the receiver when you buy it.

So, you just need to follow those few steps (see next figure):

1. Connect Throttle pins on the MultiWii to channel 3 on the receiver.
2. Connect Roll pins to channel 1 on the receiver.
3. Connect Pitch pins to channel 2.
4. Connect Yaw pins to channel 4.
5. Connect Auxiliary 1 to channel 5.

Notice : the last row of pins on the receiver is for the ground (-), the middle one for positive (+) and the first one for the signal (s).

The throttle as 3 pins to connect, so make sure you connect them right.

But, for the rest you only need to connect them in the first row (signal) of the receiver.